CAN Pal - CAN Bus Transciever - TJA1051T/3
CAN Pal - CAN Bus Transciever - TJA1051T/3
Art.Nr.: ADA-5708
1-2 Arbeitstage
sku ADA-5708
Produktbeschreibung
CAN Pal ist ein 12 V- und 24 V-geeigneter CAN-Bus-Transceiver für Datenraten bis zu 5Mbps.
Wenn Sie ein Board mit nativer CAN-Peripherie-Unterstützung anbinden möchten, ist der Adafruit CAN Pal Transceiver die naheliegende Lösung, denn er kann 3-V-Logikpegelsignale in differenzielle CAN-Signale umwandeln.
Adafruit hat diesem Breakout-Board ein paar nette Extras hinzugefügt, die ihn in vielen gängigen CAN-Szenarien sehr nützlich machen..
Weitere Informationen finden Sie auf der Website von Adafruit.
<li>TJA1051/T3 can communicate with 3.3V~5V logic for use with modern microcontrollers.</li>
<li>5V charge-pump voltage generator, so even though you are running 3.3V power and logic on most modern microcontroller boards, it will generate a nice clean 5V as required by the transceiver.</li>
<li>3.5mm terminal block that can be soldered in to get quick access to the High and Low data lines as well as a ground pin.</li>
<li>2 x 60 ohm termination resistor on board (120 ohm in series), you can remove or activate the termination easily by flipping the onboard switch.</li>
<li>Fully ISO 11898-2:2003 compliant.</li>
<li>Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase.</li>
<li>Suitable for 12 V and 24 V systems.</li>
</ul>
<li>5V charge-pump voltage generator, so even though you are running 3.3V power and logic on most modern microcontroller boards, it will generate a nice clean 5V as required by the transceiver.</li>
<li>3.5mm terminal block that can be soldered in to get quick access to the High and Low data lines as well as a ground pin.</li>
<li>2 x 60 ohm termination resistor on board (120 ohm in series), you can remove or activate the termination easily by flipping the onboard switch.</li>
<li>Fully ISO 11898-2:2003 compliant.</li>
<li>Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase.</li>
<li>Suitable for 12 V and 24 V systems.</li>
</ul>
